Sunday, February 12, 2012

CBG Tools -- Set Up Your Shop

Purists will tell you the only 'real' way to build a cigar box guitar is with hand tools.  Progressive builders like  the speed associated with the use of power tools.  And, then there are the moderates like me, who think a combination is the way to go.  It is really up to the person creating the instrument, and in my opinion there is no right or wrong way, which conforms to the 'no rules' approach to our hobby.

My shop is small, so a tool combination fits my environment well, especially since it is a materials storage and assembly area as well.  I've found that bigger isn't necessarily better.  I'll share with you the list of tools I find suitable to my builds.  It's not all inclusive, because it isn't necessary to list every screwdriver, clamp, pliers or cutter, or special tool . . . those items come as the result of individual creation and imagination.  So, let's get started.

HAND TOOLS

Files and Rasps -- The basic styles for me are flat, half round, and rat tail, in a variety of sizes. I like them for shaping necks and finishing any openings I cut for sound holes, etc.  Rasps allow fast removal of material, and files work for the removal stage prior to sanding.

Sanding Blocks -- Necessary for preparing all surfaces for final finish.  And, specialty blocks made for shaping fret boards make that job a lot easier.

Chisels -- Come in handy when shaping necks, finishing electronic part cavities and neck pockets.

Spoke Shaves and Block Planes -- Useful for shaping and leveling surfaces.  A variety of block plane styles are available for rough work or final preparation, and spoke shaves work well for dressing the back of a neck.

Hand Saws -- I often use hand saws in my builds.  A back saw and miter box for trimming pieces to the proper length.  An Xacto saw for fine work that larger saws just do not accommodate.  A special fret saw for cutting the slots in the fretboard.  And, a coping saw for the fine opening in the top for sound holes.

Knives -- There are a number of occasions when a knife will do the job another instrument just cannot do, such as cutting cardboard templates.  A utility knife, various Xacto blades, and my pocket knife come in handy on my bench.

Screwdrivers -- Don't forget to arm yourself with a variety of screwdrivers, both large and small, and of various point styles.  You'll need the variety for everything from tuners to tailpieces.

Squares -- Three tools that I use often are the adjustable square, the engineer square, and the adjustable bevel gauge.  They are great for marking saw cuts and for determining headstock angles.  And, you'll find a dozen other uses when you get started on a CBG.

Drill Bits -- You will find that a broad variety of bits in many sizes are necessary.  You will want a set of pilot point bits for general drill work; brad point bits for tuner openings and fretboard inlay, because they cut nearly flawless holes; Forstner bits for cutting holes that require a flat bottom and for removing wood initially from pickup and pot cavities, before dressing the openings with a chisel; and spade bits for work that does not require a precision cut -- I don't use these often, but there may be a time when you find them helpful.

Mallet -- I recommend the use of a small mallet (rubber or rawhide), whenever you are using chisels, or when you may be tapping hardware into position.  Avoid using a hammer on your delicate work for obvious reasons.

Whetstone -- It is critical that bladed tools are kept sharp, and the best way to do this is by using a large (3" x 8") fine-grade stone, which sets securely in a wood tray for protection from damage.  You can build the tray out of scraps, if the stone does not come with it.  Numerous websites explain the proper manner for sharpening various tools.

Scratch Awl -- Use a scratch awl to make a depression at the exact points where you wish to drill holes.  The small opening in the wood will act as a bit guide to assure accuracy.  Also, use the awl for marking around templates which will serve as guide lines for sawing.

French Curves -- French curves, triangles, circle templates, and straightedges, are an essential part of your tool cabinet.

Straightedges -- Straightedges in a variety of lengths, are necessary for obvious reasons.  The funky other tools will be priceless when you start applying the really cool designs floating around inside your head.

Pin Reamer -- A pin reamer is used primarily to shape the holes where strings are inserted into an acoustic guitar bridge and for the strap button, but they can also come in handy for other applications, like enlarging tuner holes, etc.

Caliper -- Using a digital Vernier Caliper is the most accurate way to measure thickness and depth of a hand carved neck.  And, there is no better way to determine accuracy for precision drilling.

Clamps -- Essential to all aspects of CBG building, and never enough of them.  My favorite is the quick grip, but I also use spring clamps in a variety of sizes.  Use them for clamping stock on the drill press platform; attaching fretboards to necks; firmly holding rough-cut necks to the bench while doing rasp and file shaping; and a variety of other times when an object must be temporarily held in place.  C-clamps can be used, but they are too awkward and bulky for me.



Third Hand -- This claw-limb assistant is a must when soldering wires.  The arms are adjustable and easy to use.  I don't use the magnifying glass, but I suppose there is something that it will come in handy for.  I can attach it to my portable guitar assembly table with a carriage bolt, washer, and wing nut, whenever I'm soldering small parts and put it away when not in use, which make it the best four bucks I've ever spent at Harbor Freight.





Vice -- There are a variety of vice shapes, makes, and descriptions out there, which can add to the confusion, but I recommend a couple which will make your life enjoyable and easy.  A basic bench mounted adjustable 4- or 6-inch metal jaw vice will do well for most metal and rough wood work, but when stabilizing guitar bodies, necks, etc., you will want something designed for that purpose, so keep that in mind.  But, the vice you will find most useful  is similar to the illustration to the right.  It has larger and more narrow jaws to accommodate the sharp file angle necessary in shaping nuts and saddles.  I found mine at Stewart-MacDonald.

Nut Files -- These are specialty tools designed to make grooves in nuts where strings ride.  They come in a variety of sizes for the purpose intended and are available at suppliers like StewMac.

Fret Tools -- These tools and materials are also specialty items designed to make the job of fretting a guitar an easy and rewarding experience.  A complete inventory of tools and parts needed in the effort is available at Stewart-MacDonald.  Pick up their catalog, or give them a call for any assistance in determining your needs.


Respirator -- You will be creating a great amount of wood dust,which is extremely dangerous to breathe, so while you're doing this, you should be wearing a respirator.  The little white cotton masks are good for preventing pollen from getting inside your lungs, but they are not adequate for dust and fumes generated in the process of woodworking.  So, invest in a good quality mask with replaceable filter inserts.  You, your family, and your doctor will be pleased.


POWER TOOLS

Drill Press -- A drill press is essential for my shop.  It is not only the easiest and most accurate way to drill tuner holes,but after I added a larger platform with an adjustable fence, it became a rotary sander whenever I need to finish the edge of longer pieces or the edges of sculpted headstocks, etc.

Soldering Iron -- I use two types of soldering irons.  One is the conventional 30w wand, and the other is an adjustable wattage 'pencil' style that can also be used for wood burning images into my creations.  If you need my thoughts on soldering, please see the 'How To' post on this site.

Table Saw -- I don't use my table saw a lot, but when I need to rip a larger piece of lumber into neck stock, or cut scarf joints, it works for me.  Purists would say that hand saws are to only way to go, but for me the easy way is the best and most accurate, especially with the scarf jig I made.

Band Saw and Scroll Saw -- I use each of my specialty saws all the time, and I cannot imagine trying to cut sculpted headstocks or sound holes any other way.  And, when cutting nut and saddle stock, bridges, etc., the scroll saw is the perfect.

Hand Drill -- Although I use my drill press for nearly all the basic needs, there are times when my hand drill does the job efficiently, and it is essential to my tool chest.  I like it because it is small and easy to handle, but because it will accept a 3/8" bit shank, so I'm not confined to just small bits.

Belt/Disc Sander -- My bench model works great for shaping and smoothing pieces prior to the finish step.

Planer -- The bench planer is the tool that provides the versatility to be able to custom cut stock to the thickness desired, without wasting time searching suppliers for the inevitable 'lost cause' that just isn't available in mass produced lumber for box stores, and/or neighborhood lumber stores.

Router -- I don't use my router a lot, but when I need it to open or dress cavities in a solid guitar body or to carve out a channel for a truss rod, it is necessary to have around.  And, the way I have it set up, I can use it either as handheld or table mounted.

Dremel Tool -- Because of its size and available attachments, the Dremel tool is the handiest little gadget in my tool box.  Although, I like to do most of the finish work by hand, the Dremel allows me the option to do things the easy way, if I get lazy.  The investment can be a bit pricey if you go with the 'big' model, but you can get by nicely with a basic version, and add only the attachments you will 'really' use.
Vacuum -- A broom and a dust pan will work, but the minimal investment in my ShopVac is the best use of forty bucks (on sale before Christmas at my local retailer) that I can think of . . . aside, from a couple cases of Heiniken.  It makes cleaning up a mess about as enjoyable as it can be, and it makes my wife tolerate my hobby a lot more than the days of the broom.

Thursday, February 9, 2012

Neck Strap

I mentioned that when I was shopping at the secondhand store, I spied a really cool item for a neck strap.

It looks like a belt some hippy chic may have worn, before she exchanged it for cash, etc..  If so, she would have been the local moonshiners delight when she waltzed into the bar with this baby strapped around her midriff.

Not designed or nearly long enough for a guitar strap.  After polishing the chrome and stainless pieces, I added the notched leather straps at the ends, which fit securely over the buttons on the Crapocaster.  And, it's just outrageous enough to fit the theme perfectly.

The 'Whoopin' Stick''

I saw a photo several weeks ago of a bed warmer turned into a single-string instrument.  It was a pretty crude example of what I thought could be a really interesting 'allmosta guitar', so I started looking around for a similar item.  My exploration took me to Craig's List first, nothing there, so I was off to eBay, where I found several, all in England, but the cheapest was $35US, and I'm not paying thirty-five-bucks for a brass can someone sticks hot rocks in to warm the sheets . . . that's more than some hookers were getting at the Superbowl to warm a bunk . . . which the nuns from Cleveland were talking about in their quest to save young women from creepy 'ol men.  They were probably as successful in their game as the Patriots.

Browsing around a junk shop in Delaware (that's Ohio) last week, I discovered one of these nifty little things.  It is brass with a curly shaped handle, really a half-handle, in that it was only a half-inch thick and rounded on one side only . . . weird, but if you've been to England you can understand . . . they have some strange customs, like driving on the 'other' side of the road, and calling french fries 'chips' . . . geez, no wonder we won the war.  Otherwise, it was really cool looking.

I bought the thing (for two bucks --- that's $2.00).  Gawd, I love America!  Beat feet out of the place and for the next 45 minutes driving home, a plan emerged from inside my ghourd.

After unscrewing the brass can from the half-stick, I glued the stick to a walnut neck blank I use for my other guitars.

When the glue dried, I commenced to fit and shape the laminated neck to match the original design, but the headstock needed it's own treatment, which was a snap.  It took me a couple hours to shape, rasp, file, drill and sand the neck to the final stage, before a finish coat was applied.  While this was going on, I polished the can to a high gloss.

Once that was complete, I marked the nut and bridge positions, and also the 'key' fret (there are no frets) positions, secured the custom pieces to the 'new' stick, installed it in the can, complete with Piezo pickup, added strings, and voila, I gots me a real two-string 'whoop stick' tuned to open G.

These little brass cans with a stick for a neck are sometimes referred to as Lowebows or strumsticks, but I call mine a 'Whoopin' Stick', as in whoop ass, 'cause it turned out to be really fun to play and it beats hell out of fighting with a slide on a six-string.  I've discovered that I am not that guy, and I never will be.  Besides, that cool vibe should be left to the old Black guys who really know how to make a slide growl.  Us white boys just don't have what it takes.

This turned out so well, I think I'll go back for the other two warmers the guy has.  And, wait 'til you see pics of the cool thing I found for a neck strap at this store.



Tuesday, January 31, 2012

' The Crapocaster'

The suspense is over!  You can now see what I created from the bed pan referenced in an earlier post.





A '50s style unused female bed pan in the original box' was found in a renovated house on Lake Erie, and it became the latest and most outrageous TotalRojo creation to date.  This thing is so damn cool I want to sit on it!  And, it sounds awesome through my amp!

A Fender Stratocaster neck, complete with tuners and string trees, is attached to a support beam with screws from the under side, just like the real deal, but they are hidden from view.  The support beam is attached to the pan body with one visible bolt in front under the neck, and this is designed to serve as a strap knob as well.  That's it, no other visible attachments.  However there are two screws supporting the back of the beam to the pan body, but they are hidden under the bridge.  Adorning the neck is the hand painted Crapocaster logo visible in the photo.

The shape of the pan lent itself to the unique design for the custom poplar wood scratch plate, which covers the opening of the pan.  This turned out to be a really neat mini-guitar shape, which compliments nicely the over all guitar body design.  It is attached to the main beam with screws hidden under the bridge as well.

All controls (single coil pickup, volume pot, tone pot, and output jack) are recessed into the underside of the scratch plate.  A custom designed pickup enclosure was crafted from a discarded piece of Spanish cedar that came from one of the cigar boxes I used for a guitar some time ago.  I keep all that stuff for future use, and you can see it comes in handy.

A Fender-style solid body bridge is attached to the scratch plate, hiding the attachment screws referenced above, and the bridge/string ground wire from internal electronics . . . gotta have that to eliminate hum from the amp.

I received a complimentary set of SIT (Stay In Tune) Power Wound extra light strings a while back, so I strung those on to see how they perform, and they are great.  I like the lighter gauge strings on my guitars, 'cause there easier for my old fingers to move around.

And, last but not least, are the hand painted flames on the back of the pan.  Base color of the flames is vermilion with a darker rust outline and with blue-green accents on the tips to make them come alive.  I liked the clean look of the bare white pan, but I just had to lay down a few lines of flames to set this thing afire.

I hope you like it.

'The Triangle'

A San Latano Requiem Maduro cigar box has become the body of a really cool three-string electro/acoustic slide guitar.  I chose a full fretted red oak neck and maple fingerboard for the strings to dance over.  A walnut laminate covers the headstock scarf joint, and Corian serves for the nut and saddle.  Because of the inverted bevel design of the box top, the string action rides a little higher than usual to accommodate it.  Black tuners were chosen to compliment the box color.  It's a very basic design, nothing wild or strange, but it works very well with a slide . . . sounds good and fun to play.

Monday, January 30, 2012

What This May Become?

Just the other day, I was searching eBay for unusual objects and I ran across this old bed pan.  It was offered for sale by a lady from northern Ohio, up by Lake Erie, who during remodeling an old home they bought, found this little beauty unused in the original box, from the fifties.

"What in hell will I do with a bed pan", I asked myself?  Besides, it didn't have the ol' penis pipe that you see on most bed pans.  That's because it for a female, my wife informed me.  But, it looks a lot better without that goofy thing sticking out the back, or is it the front?  Who cares, it sticks out, that's what I do know, and it doesn't look too cool.

All kinds of application possibilities were floating around inside my gourd when I saw this thing, so I had to have it, and for $4.49 it was areal bargain . . . have you ever priced these things on the retail floor?  You can piss away fifty bucks in one pass.  No pun intended.

What could this become?

It could be a hard hat for Newt.  Perhaps a soup bowl for Mitt.  How 'bout a brandy snifter for the Governor of Arizona, (if shes even knows what brandy is, those desert dwellers think Grand Marnier is Joe Arpaio)?  Maybe a tea pot for the Tea Party.  What about a yacht for Ron Paul, so the old buzzard can sail out of our lives?  Geez, the possibilities are endless.

But, I got an idea that will knock your socks off.  So, stay tuned and I'll share it soon.

Sunday, January 29, 2012

Design & Decoration -- 'How To' for Cigar Box Guitar

Limitations associated with decoration for your CBG is in direct proportion to the expanse of your imagination . . . there really are no limits.

I will offer some suggestions for you to expand on, but if you really want to get a feel for what others are doing, go to http://cigarboxguitarsaustralia.ning.com/.  The folks down under do some of the most outrageously cool designs you will lay an eye on.

So, what elements make up the basic CBG decorating possibilities?  Not much that will get in the way of your creativity.  And, some of it is optional.

*  Headstock
*  String trees
*  Neck
*  Fingerboard
*  Cigar box body
*  Neck cavity
*  Sound holes
*  Magnetic or Piezo pickups
*  Control knobs
*  Bridge & saddle
*  Tail stock string retainers
*  Resonator

Let's take a shot at items on the list, to see what design possibilities we can come up with.

Headstock -- The shape is usually an individually desired design, which looks good to the builder, and is only limited by size and tuner placement.  It can be left plane without ornamentation, stained or painted, wood burned, or laminated
with wood, paper, plastic, etc., to individualize it.  And the lamination can be in to form of artwork, logo, veneer to cover a scarf joint, etc.  Small geegaws can be glued to the surface or inset to enhance the design.  But, whatever you do, try to incorporate the headstock design into the overall guitar design, because the finished guitar will just look better.


String trees -- Trees can be in the form of commercially available pieces, or they can be the builder's own design.  But, they can be made to look really cool on a headstock, as well as to be an effective way to keep the strings on the nut on a straight-neck guitar.  Trees can be made from metal, wood, plastic, bone, or whatever else you as a builder finds acceptable.  Use your imagination.

Neck -- The neck and headstock are obviously one piece, but the neck can be decorated as well.  And, it can be shaped to fit your overall design.  Will it be a through-body design or a bolt-on neck?  Will you want it sculpted to feel slick when being played, or left with hard edges to give it a more rugged, funky look?  Will is have a 'skunk stripe' to emulate some of the factory jobs?  Will it be painted, stained or left a natural color?  However you decide, try to once again keep the overall design in mind.

Fingerboard -- Will it be fretted with the real thing, or will fret positions be marked with a line?  Either way, a design can be inlaid, painted or laminated on the surface, or burned into it with an iron.  The design can be as elaborate as you want it to be, or it can be as simple as fret position marks only.

The box -- All surfaces on the box can be used for special design, or the box can be left plain.  But, whatever you decide is once again limited only by your creativity.  So, let your imagination wander, or steal an idea or three from someone else's rig . . . don't worry, they got the idea from someone else, too.  You can paint the box; glue on pictures or photos; apply decorations; add enhancements to change the shape;  or you can step away from the cigar box and use something unconventional to make your creation stand out . . . how 'bout and oil can, and ammunition box, a toilet seat, or a bed pan?  That aught to get your neighbors and in laws talking.


Neck cavity -- This is the opening on the leading side of the box, where the neck is inserted into the box.  It is important to think about this when cutting the opening.  You want it to look good, not just to be a hack job.  And, even the most carefully cut opening can be enhanced with some form of decoration to surround it. Again, the design possibilities are endless.

Sound holes -- These are the openings in the box top, which are not only cute, but they are functional in that they let the acoustic sound escape the confines of the box.  So the design should be carefully considered, not only to look good, but to function, too.  They can be as simple as drilled holes left open; holes covered with metal decoration; screened from underneath; or as complex as openings designed so that small files and saws must be used to complete the design.  Keep in mind that bigger is not necessarily better, when designing sound holes.  Sound will bounce around quite nicely from a couple holes the size of a half dollar in the top of the average size cigar box.

Bridge and saddle -- I've used wood, brass rod, bone, plastic, metal objects such keys, and Corian (my favorite nut and saddle material), and I know others who have used bolts and other stuff for saddles, so whatever you decide will be OK.  If it doesn't work for you, you can always do it over . . . 'cause we have do-overs in this hobby.  I like to shape wood for the bridges on my builds, but you may find that something else works better for you, so go for it.


Tail stock string retainer
The string retainer on my bass, the 'Gutshaker' is 'borrowed' from my wife's silverware collection.  Well, what's a fella to do when he needs a special part to complete a CBG build?  She was looking for it the other day, but I didn't have the courage to tell her it was now a piece of art on a guitar.  It worked out perfect for what I had envisioned.




Resonator -- You can purchase a 'real' resonator, or you can get creative, it's your choice.  But, for a CBG, I like the more imaginative approach, such a using a tuna can, a paint can lid, a license plate, a vintage hubcap, or my dog's stainless water bowl . . . the dog might get pissed, but a man's gotta do, what a man's gotta do, right.

___________________ 


Following are a few more photos, which will show you the many possibilities for creating a really cool and playable instrument.  The thing to always keep in mind is that, "There is no right or wrong" way to build a cigar box guitar.








If you want to see more photos of my guitars, go to the right-hand column of my blog and scroll down to the images under the 'TotalRojo' sign, and click on any of the images and it will take you to the full explanation of each guitar, with added photos.

I hope what you have experienced here will be helpful to you.  If so, let me know.  And, you can follow my site for future information, just click on the 'follow' button at the top of the home page.

Thanks for viewing!

Tuesday, January 24, 2012

'The Torpedo'

Sandusky Street in Delaware, Ohio is the home of at least three very nicely organized and stocked antique and secondhand stores.  And, one of those stores is where I found an old, really cool, cigar box, which has become 'The Torpedo', a three-string electro/acoustic guitar.

It is a Fabrica deTabacos de Hupmann box made in La Romana Dominican Republic.  The Spanish Cedar dovetail joint construction of the box makes it a sturdy resonator for a guitar.

The headstock on the cherry neck is a scarf joint design that has zebra wood laminated to the top to cover the scarf joint.  Corian nut and saddle enclose the 25.4-inch scale maple full-fretted fingerboard.  Sound holes in varying sizes and design open the top of the box to allow sound to bounce around, and a Piezo transducer pickup installed under the bridge transmits sound to an amp.

The Torpedo is tuned G-D-g, like most of my guitars, and it sounds very nice acoustically with a strong growl resonating from the box.


'Red'

I found a red LaGloria Cubana Series N cigar box at my favorite cigar shop the other day, which I was sure would make a perfect amp.  So, off I went with the thing tucked securely under my arm, with numerous images dancing around in my skull.

Back at my shop, it took me about 20 seconds to noodle a design, and out came the drill bits, Xacto mini saw,  a couple files, and my favorite MAH3 GuitarFuel harness.

The speaker openings are simple holes drilled with varying size Forstner bits, in a circle on the back of the box.  Rubber feet are from the local hardware store, along with the handle, which is a cabinet pull.  On/Off, Volume, Tone and Overdrive controls are on the upper right side, and Input jack, AC adapter plug, and ear bud jack are located below the controls on the right side, for convenience.  The front of the box slides open to reveal the inner workings.

This little gem took me about an hour to complete, and to test drive on one of my guitars.  Like usual, all the controls worked perfectly, and it sounds good to boot.

I named it 'Red' for obvious reasons.

Sunday, January 22, 2012

Amp Building -- 'How To' for Cigar Box Guitars

Building a cigar box guitar amplifier can be as simple or as difficult as you choose to make it.  For me, the more simple route suits me best.  I'm not an electronics wizard, and I'm not into creating amps from telephones and transistor radios, so I like to use a cool cigar box for my enclosure and a ready-made wire harness, which I know works.  Perhaps, if I could find well-defined pictorial directions, I would convert my old tape recorder into an amp, but I haven't found that yet, so here is my idea of a good time.

1.  I get out the proven-to-be-good GuitarFuel wire harness, from my supply inventory.  If I'm not interested in using an AC adapter with my amp, I choose the SD-2W harness.  It's easy to install, and it works great.  If I want a little more from my amp and the convenience of plugging it into the wall, it's the SD-MAH3 for me.  In my opinion, the GF harness is the best available.  It may be a couple bucks more than some of the others I see on some of the web sites, but the quality is top notch, and I don't have to screw around with anything . . . it comes to me ready to install.


 SD-2W

2.  Next, I select the cigar box I want to use for my amp . . . and, my selection might be something other than a cigar box, if I find something so unique that I cannot live without it, such as a vintage radio.  But usually it's a cigar box.  The box must be large enough to accommodate the harness, and speaker of choice.  My favorite is the 'Acid' box, but, I have a drill press and Forstner bits, so I can drill the necessary holes deep enough to accommodate the switches and plug connectors.  The sides and front of the Acid box are much thicker than many other possibilities.



3.  While I was doing #1 & 2, I was also thinking about the design, and now I'm ready to move forward.  Where will the controls and connectors be located?   What about the sound hole opening over the speaker?  What other special items to consider, e.g., handle, knobs, latch, feet, graphic application, and etc.  The controls should be easily accessible and the speaker opening should be in an area that pumps sound toward your audience.  You can make a control location template, which will make your job easy.  However, changing things around gives originality to your builds, so you may want to forego the template idea.  And, the harness leads are long enough to allow for any possible location idea you may have.

That's about as complicated as it gets.  So, grab your tools and go to work . . . all you'll have is fun.

Following are some design ideas you may find useful.












And, for a closer look at the detail of the amps I build, please go to the right hand column of the home page, scroll down to the 'amplifier' logo, and click on any picture to be taken to the post explaining the build.

I hope this tutorial has been helpful and inspirational.